- direktesalg til privatpersoner, foreninger og forhandlere
Priser fra 49.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
2,4 mm - gold | |||
| Pris stk | På lager | ||
| 0.00 | -1 stk + | ||
2,7 mm - gold | |||
| Pris stk | På lager | ||
| 0.00 | 0 stk + | ||
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
Priser fra 49.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
Priser fra 59.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | -1 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | -1 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | -1 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
Priser fra 59.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
Priser fra 59.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
Priser fra 59.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
Priser fra 59.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
Priser fra 59.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 59.00 | 0 stk + | ||
Priser fra 49.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached to the innertubing in front of the tube fly.
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
Midgar Coneheads for tubeflies have extra room for covering tie in spots for wings and hackles, so it is very easy to get a nice transition from conehead to wing without any open space between wing and cone.
The innerhole on Midgar Coneheads for tubeflies are custom made to fit Midgar innertubing.
• size micro conehead fit size small innertubing
• size small conehead fit size small innertubing
• size medium conehead fit size medium innertubing
• size large conehead fit size medium innertubing
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
Priser fra 49.00info & kjøp
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached the innertubing in front of the tube fly.
The innerhole on the coneheads are custom made to fit Midgar Innertubing.
Midgar™ Coneheads are delivered in metal plated finsishes only.
- size micro coneheads fit size small innertubing
- size small coneheads fit size small innertubing
- size medium coneheads fit size medium innertubing
- size large coneheads fit size medium innertubing
The innerhole on the coneheads are custom made to fit Midgar Innertubing.
Midgar™ Coneheads are delivered in metal plated finsishes only.
- size micro coneheads fit size small innertubing
- size small coneheads fit size small innertubing
- size medium coneheads fit size medium innertubing
- size large coneheads fit size medium innertubing
Midgar Coneheads og kulehoder
Midgar Tubefly Conehead
Midgar Coneheads for tubeflies are custom made to fit the modern tube fly tying concept where coneheads are attached the innertubing in front of the tube fly.
The innerhole on the coneheads are custom made to fit Midgar Innertubing.
Midgar™ Coneheads are delivered in metal plated finsishes only.
- size micro coneheads fit size small innertubing
- size small coneheads fit size small innertubing
- size medium coneheads fit size medium innertubing
- size large coneheads fit size medium innertubing
The innerhole on the coneheads are custom made to fit Midgar Innertubing.
Midgar™ Coneheads are delivered in metal plated finsishes only.
- size micro coneheads fit size small innertubing
- size small coneheads fit size small innertubing
- size medium coneheads fit size medium innertubing
- size large coneheads fit size medium innertubing
x-small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
small - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
medium - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
large - 24 pci | |||
| Midgar Coneheads for tubeflies are custom made to fit the tube fly tying concept we startet with here in Scandinavia from the middel of the 1990ties by attaching cone heads in front of the tube fly. Midgar Coneheads fit perfectly on the Midgar Innertubing. No more drilling, no more sweating, just put them on! Never has it been easier to make nice looking, durable tube flies with cone heads in front! Midgar Coneheads for Tubeflies are made with an extra large inside opening in the back so it easily will fit over the tie-in and tie-off point on your tubeflies. The innerhole on the coneheads are also custom made to fit Midgar Innertubing. Midgar Coneheads are delivered in metal plated and powder coated finsishes. During 2008 there will be two sizes of cones available to every Midgar Innertubing size. Midgar Coneheads are named according to the size of the Midgar Innertubing they will slide over, then the actual size of the coneheads itself follows, Length x Width mm. The sizes in parantes are available from march/april 2008. These sizes are available (#M003 - Small 2,67 x 3,5 mm), #M004 - Small 3 x 4 mm, (#M005 - Medium 3,17 x 4,25 mm), #M006 - Medium 3,33 x 4,5 mm, (#M007 - Medium 3,5 x 4,75 mm), #M008 - Large 4 x 5,17 mm. Midgar Coneheads for Tubeflies are delivered in 7 different finishes; plated nickle, plated black nickle, plated copper and plated gold, and powder painted in bright orange, bright green. There are 20 coneheads/pack in plated finishes and 5 coneheads/pack in powder coated finishes. | |||
| Pris stk | På lager | ||
| 49.00 | 0 stk + | ||
Copied to Clipboard
