Silikonslanger til tubefluer er et nødvendig hjelpemiddel hvis man ønsker å feste kroken midlertidig til tubeflua under fiske. Når fisken tar tubeflua, vil kroken løsne fra tubeflua, og fisken kan dermed ikke bruke tubeflua som brekkstang for å komme seg løs fra kroken. I hver pakke er det ca 0,5 m med slange.
Pris 1-4 stk
Pris 5-11 stk
Pris 12 stk+
På lager
49.00
46.55
41.65
35 stk +
002 - medium
i
Silikonslanger til tubefluer er et nødvendig hjelpemiddel hvis man ønsker å feste kroken midlertidig til tubeflua under fiske. Når fisken tar tubeflua, vil kroken løsne fra tubeflua, og fisken kan dermed ikke bruke tubeflua som brekkstang for å komme seg løs fra kroken. I hver pakke er det ca 0,5 m med slange.
Pris 1-4 stk
Pris 5-11 stk
Pris 12 stk+
På lager
49.00
46.55
41.65
35 stk +
Priser fra 59.00info & kjøp
Midgar Bottlenecks og tubeslanger
Midgar Tubefly Tubing
401 - small inner tubing
i
Midgar tubefly tubing is designed to fit the modern tube fly tying concept of using an innertubing and outertubing, where the tie in spot for the front section of the tube fly, i.e. the front hackles, flashes and wing sections, is tied in on the innertubing itself, not on the outer tubing. At the same time the innertubing are scaled to perfectly fit different sizes of cone heads to be put in front of the fly, if that is desiable.
Midgar tubefly tubing is sold in size small, medium, large and x-large in inner- and outer tubing, where size small innertubing fits perfectly into size small outertubing etc. They are sold pr the meter. We recommend to glue the inner- and outer tubing together to each other with a thick, water resistant super glue. Zap-a-Gap thick super glue is recommended. However, the tubing needs pressure to lock permanently, so always use 2-3 turns of oval tinsel as tag on your flies!
A full selection of Midgar coneheads for tubeflies are offered and fit perfectly on Midgar tubefly innertubing. See Midgar coneheads for tubeflies to find out color selection and which cone heads fit which inner tubes.
Pris stk
På lager
59.00
30 stk +
402 - small outer tubing
i
Midgar tubefly tubing is designed to fit the modern tube fly tying concept of using an innertubing and outertubing, where the tie in spot for the front section of the tube fly, i.e. the front hackles, flashes and wing sections, is tied in on the innertubing itself, not on the outer tubing. At the same time the innertubing are scaled to perfectly fit different sizes of cone heads to be put in front of the fly, if that is desiable.
Midgar tubefly tubing is sold in size small, medium, large and x-large in inner- and outer tubing, where size small innertubing fits perfectly into size small outertubing etc. They are sold pr the meter. We recommend to glue the inner- and outer tubing together to each other with a thick, water resistant super glue. Zap-a-Gap thick super glue is recommended. However, the tubing needs pressure to lock permanently, so always use 2-3 turns of oval tinsel as tag on your flies!
A full selection of Midgar coneheads for tubeflies are offered and fit perfectly on Midgar tubefly innertubing. See Midgar coneheads for tubeflies to find out color selection and which cone heads fit which inner tubes.
Pris stk
På lager
59.00
30 stk +
601 - medium inner tubing
i
Midgar tubefly tubing is designed to fit the modern tube fly tying concept of using an innertubing and outertubing, where the tie in spot for the front section of the tube fly, i.e. the front hackles, flashes and wing sections, is tied in on the innertubing itself, not on the outer tubing. At the same time the innertubing are scaled to perfectly fit different sizes of cone heads to be put in front of the fly, if that is desiable.
Midgar tubefly tubing is sold in size small, medium, large and x-large in inner- and outer tubing, where size small innertubing fits perfectly into size small outertubing etc. They are sold pr the meter. We recommend to glue the inner- and outer tubing together to each other with a thick, water resistant super glue. Zap-a-Gap thick super glue is recommended. However, the tubing needs pressure to lock permanently, so always use 2-3 turns of oval tinsel as tag on your flies!
A full selection of Midgar coneheads for tubeflies are offered and fit perfectly on Midgar tubefly innertubing. See Midgar coneheads for tubeflies to find out color selection and which cone heads fit which inner tubes.
Pris stk
På lager
59.00
30 stk +
602 - medium outer tubing
i
Midgar tubefly tubing is designed to fit the modern tube fly tying concept of using an innertubing and outertubing, where the tie in spot for the front section of the tube fly, i.e. the front hackles, flashes and wing sections, is tied in on the innertubing itself, not on the outer tubing. At the same time the innertubing are scaled to perfectly fit different sizes of cone heads to be put in front of the fly, if that is desiable.
Midgar tubefly tubing is sold in size small, medium, large and x-large in inner- and outer tubing, where size small innertubing fits perfectly into size small outertubing etc. They are sold pr the meter. We recommend to glue the inner- and outer tubing together to each other with a thick, water resistant super glue. Zap-a-Gap thick super glue is recommended. However, the tubing needs pressure to lock permanently, so always use 2-3 turns of oval tinsel as tag on your flies!
A full selection of Midgar coneheads for tubeflies are offered and fit perfectly on Midgar tubefly innertubing. See Midgar coneheads for tubeflies to find out color selection and which cone heads fit which inner tubes.
Pris stk
På lager
59.00
30 stk +
801 - large inner tubing
i
Midgar tubefly tubing is designed to fit the modern tube fly tying concept of using an innertubing and outertubing, where the tie in spot for the front section of the tube fly, i.e. the front hackles, flashes and wing sections, is tied in on the innertubing itself, not on the outer tubing. At the same time the innertubing are scaled to perfectly fit different sizes of cone heads to be put in front of the fly, if that is desiable.
Midgar tubefly tubing is sold in size small, medium, large and x-large in inner- and outer tubing, where size small innertubing fits perfectly into size small outertubing etc. They are sold pr the meter. We recommend to glue the inner- and outer tubing together to each other with a thick, water resistant super glue. Zap-a-Gap thick super glue is recommended. However, the tubing needs pressure to lock permanently, so always use 2-3 turns of oval tinsel as tag on your flies!
A full selection of Midgar coneheads for tubeflies are offered and fit perfectly on Midgar tubefly innertubing. See Midgar coneheads for tubeflies to find out color selection and which cone heads fit which inner tubes.
Pris stk
På lager
59.00
31 stk +
802 - large outer tubing
i
Midgar tubefly tubing is designed to fit the modern tube fly tying concept of using an innertubing and outertubing, where the tie in spot for the front section of the tube fly, i.e. the front hackles, flashes and wing sections, is tied in on the innertubing itself, not on the outer tubing. At the same time the innertubing are scaled to perfectly fit different sizes of cone heads to be put in front of the fly, if that is desiable.
Midgar tubefly tubing is sold in size small, medium, large and x-large in inner- and outer tubing, where size small innertubing fits perfectly into size small outertubing etc. They are sold pr the meter. We recommend to glue the inner- and outer tubing together to each other with a thick, water resistant super glue. Zap-a-Gap thick super glue is recommended. However, the tubing needs pressure to lock permanently, so always use 2-3 turns of oval tinsel as tag on your flies!
A full selection of Midgar coneheads for tubeflies are offered and fit perfectly on Midgar tubefly innertubing. See Midgar coneheads for tubeflies to find out color selection and which cone heads fit which inner tubes.
Pris stk
På lager
59.00
32 stk +
901 - x-large inner tubing
i
Midgar tubefly tubing is designed to fit the modern tube fly tying concept of using an innertubing and outertubing, where the tie in spot for the front section of the tube fly, i.e. the front hackles, flashes and wing sections, is tied in on the innertubing itself, not on the outer tubing. At the same time the innertubing are scaled to perfectly fit different sizes of cone heads to be put in front of the fly, if that is desiable.
Midgar tubefly tubing is sold in size small, medium, large and x-large in inner- and outer tubing, where size small innertubing fits perfectly into size small outertubing etc. They are sold pr the meter. We recommend to glue the inner- and outer tubing together to each other with a thick, water resistant super glue. Zap-a-Gap thick super glue is recommended. However, the tubing needs pressure to lock permanently, so always use 2-3 turns of oval tinsel as tag on your flies!
A full selection of Midgar coneheads for tubeflies are offered and fit perfectly on Midgar tubefly innertubing. See Midgar coneheads for tubeflies to find out color selection and which cone heads fit which inner tubes.
Pris stk
På lager
59.00
32 stk +
902 - x-large outer tubing
i
Midgar tubefly tubing is designed to fit the modern tube fly tying concept of using an innertubing and outertubing, where the tie in spot for the front section of the tube fly, i.e. the front hackles, flashes and wing sections, is tied in on the innertubing itself, not on the outer tubing. At the same time the innertubing are scaled to perfectly fit different sizes of cone heads to be put in front of the fly, if that is desiable.
Midgar tubefly tubing is sold in size small, medium, large and x-large in inner- and outer tubing, where size small innertubing fits perfectly into size small outertubing etc. They are sold pr the meter. We recommend to glue the inner- and outer tubing together to each other with a thick, water resistant super glue. Zap-a-Gap thick super glue is recommended. However, the tubing needs pressure to lock permanently, so always use 2-3 turns of oval tinsel as tag on your flies!
A full selection of Midgar coneheads for tubeflies are offered and fit perfectly on Midgar tubefly innertubing. See Midgar coneheads for tubeflies to find out color selection and which cone heads fit which inner tubes.
